Product
Restricted area melt pressure transmitter
Model:PT124B-128
Description:
PT124B-128 Series capillary flush diaphragm melt pressure transmitter is ideal for space restricted areas applications required, where mounting space is limited. It also has a free-spinning jam nut that simplifies installation. It comes equipped with six or eight pin bendix connector. This series product is widely used in the domestic and abroad, and it can be interchangeable with the similar world standard products.
Send inquiry Download PDF- High-standard quality
- Accuracy better than ±0.5%
- Stainless steel wetted parts
- Internal 80% Shunt Calibration
- Good stability and repeatability
- Exposed, bendable capillary
- It can be widely used in various plastic extrusion lines for pressure measuring and control, such as chemical fiber manufacturing equipment, plastic rubber machine, polyester equipment and petrochemical.
| Pressure range | 0-3.5MPa…0-150MPa (0-500psi…0-20000psi) |
| Over Pressure | 1.5 X FSO |
| Combined Error | ±0.5% FSO (Including Linearity,Repeatability&Hysteresis) |
| Output | 4-20mA, 0-10V, 0-5V |
| Input Voltage | 24VDC |
| Repeatability | +/- 0.2%FSO |
| Internal Shunt Calibration (R-Cal) | 80% FSO +/- 1% |
| Insulation Resistance | 200 megohms @ 100 Vdc |
| Max Diaphragm Temperature | 350 ℃ |
| Mounting Torque | 500 inch/lbs. max. |
| Standard Wetted Parts | Diaphragm coated 15-5 PH SST |
| Process connector | 1/2 ″ -20UNF, M14×1.5, M18×1.5 Optional |